Notes
Blog
Notes on torque specs, fasteners, and the craft of getting a wrench on the right number.
- method · product
Why community-sourced torque specs fail (and what to do about it)
Forums save engines and forums kill them. A look at how wrong values propagate, the patterns that produce them, and how Torq surfaces source so you can decide what to trust.
7 min read →
- method · fasteners
Staged torque procedures: what stages, sequences, and angles actually mean
Read any modern head-bolt spec and you see "30 ft-lbs, +90°, +90°." Here is what each step is doing to the joint, and why skipping the order ruins the clamp load.
9 min read →
- safety · fasteners
Torque-to-yield bolts: why you can't reuse them
TTY fasteners deform on purpose. Reusing them is how head gaskets fail at 30,000 miles. What they are, how to spot them, and what to replace them with.
7 min read →
- math · reference
ft-lbs to Nm: the conversion mechanics need to know
How the conversion actually works, why the rounding matters on small fasteners, and a printable lookup table for the shop.
6 min read →
- fundamentals · method
How to find the right torque spec for any fastener
A working framework for tracking down trustworthy torque values — and knowing when to stop and walk away from the wrench.
8 min read →